Boosted

Urbo-Dryer

LEX-AIRE's Most Powerful Urbo-Dryer

 UDM-200S

* 200 cfm / 9 p.s.i.

* 100 degree temperature rise over ambient air

* 15 foot flexible air hose with remote switch on nozzle

* 1 - 5.7 in. dia. 3-stage turbine air pump (booster)

* 1 - 7.2 in. dia. 2-stage turbine air pump (main)

* Shipping weight - 66 lbs

* Only $1655


* Air Knife Version - 1 1/2" outlet $1595.

Air Distribution to be customized by customer to suit application, typically with PVC pipe.

Depending on your line speed and needs, multiple units can be set up in series.

Urbo-Dryer 200 in Action
Watch Video of Urbo-Dryer 200 raising temperature 79º in 4 minutes 20 seconds

Hot, Dry, Clean Urbo-Dryer air replaces costly cold, moist and dirty compressed air.

With the success of the compact Urbo-Dyers and customer requests for a dryer with more pressure and hotter air, LEX-AIRE, using state-of-the-art technology, has developed a Boosted version of the UDM- 90 Dryer. This dryer has all the unique features of the compact dryers including the Aire-Switch, 2-micron filter system, heated air and 120 volt operation.

The UDA-200 also has: 200 c.f.m. of air, almost twice the amount of the UDM-90 and up to 160+ degree F discharge air temperature.

From 69º ambient temperature, the output temperature on the 10' hose rises 70 degrees in just over three minutes to 139º, and 80 degrees in about 5 minutes 30 seconds to 149º, with the output temperature still slowly rising. (See video of temperature rise below)

The UDA-200 is available in two models, the stationary version for the shop that has limited floor space, it can be placed on a shelf or bench out of the way, and the mobile version with the wheels and handles. This model is great for the shop that may need to move to where the work is. The wheels also allow the UDA-200 to be taken up or down stairs and the hose wraps around the handle for storage.

The UDA-200 can be operated in the Boost mode or with the Boost switch off it is very similar in performance to the UDM-90.

The larger cabinet and extra sound proofing make the UDA-200 quieter.

The UDA-200 is for drying larger parts or cabinets where the higher air pressure and volume will not blow the parts away. Really hot air, really fast drying.

 UDM-200M

* 200 cfm 9 p.s.i.

* 100 degree temperature rise over ambient air

* 15 foot flexible air hose with remote switch on nozzle

* 1 - 5.7 in. dia. 3-stage turbine air pump (booster)

* 1 - 7.2 in. dia. 2-stage turbine air pump (main)

* Handle and Wheel Kit

* Shipping weight - 75 lbs

* Only $1775